August 14
Weihua 180-ton metallurgical casting crane
90+90 tons feeding semi-gantry crane
100-ton bridge crane, etc.
A total of seven multi-series cranes are dispatched
Going to Kazakhstan
Serving a steel group project in Kazakhstan
Loading site of multi-series cranes exported to Kazakhstan
Concentrated departure of export projects to Kazakhstan
This series of metallurgical cranes are designed in accordance with the FEM standard design concept, guided by modular design theory, using modern computer technology as a means, and are completed using new materials and new processes for the production environment with a wide range of temperature differences at the customer's application site. It is a new type of metallurgical crane that is highly versatile, intelligent and high-tech.
Technical features of 180-ton casting crane:
1. This machine adopts a new four-beam, four-rail and double-car rigid bridge structure, and its working level reaches A8;
2. The weight is reduced by 10% compared with similar products, and the height is reduced.25% lower and 25% smaller in width; the product can be used in ambient temperatures of -40°C to +60°C;
3. Using a new type of towing cable power supply device that is resistant to high temperature radiation, it can operate reliably under high temperature radiation conditions of thousands of degrees;
Technical features of 90+90 tons feeding semi-gantry crane:
1. This product is a special feeding semi-gantry crane for steel plants. The lifting capacity of the whole machine is 90+90t, the lifting height is 24m, and the working level is A8;
2. The product has been newly designed to address problems such as limited production space, high risk factor of skewed lifting when feeding materials, and excessive angle of the wire rope, and is an innovative product for the company;
3. Adopting a three-beam and four-rail structure, two sets of independent lifting mechanisms are designed on a single trolley, equipped with a special four-point gantry hook spreader. The two lifting mechanisms can realize the hopper dumping and feeding functions through their independent actions;
4. Conduct finite element optimization and verification calculations on the overall structure to simulate the actual operating conditions of the crane. The dead weight and wheel pressure of the complete machine are reduced by 10% compared with similar products;
The steel group is one of the world's best steel manufacturers, employing 320,000 employees in more than 60 countries. The group's annual output accounts for approximately 10% of the world's total steel production. This time, 7 Weihua multi-series cranes are serving a project in Kazakhstan of the steel group, which will help the steel group further expand its presence in the Kazakhstan steel industry and continue to expand the international market.
